Cable Grommets

Standard Off the Shelf Cable Grommets, Custom Cable Grommets - Design, Engineering, Manufacturing

Our cable assembly company offers Standard Off the Shelf Cable Grommets, and Custom Cable Grommets for a very large diversity of applications. Contact us today for:

FREE Register and Test our 3D Cable Design Tool Configure in Minutes your Solution Request a Quote for Custom Cable Molding and Manufacturing

• Off the Shelf Cable Grommets for standard cabling products: Rubber, Plastic, etc.
• Cable Grommet Design
• Cable Grommet Engineering
• Cable Grommet Manufacturing, custom cable grommets, complex strain relief solutions for OEMs in the computer, industrial, medical and telecom markets

Grommets protect cables when entering or exiting a system. The point at which a cable exits a connector body or other component can be a critical failure point.  Over the years, we dedicated considerable resources and expertise to supplying the cable assembly and OEM markets with off -the-shelf and custom molded cable management products to address this need. Among them: cable grommets, cable grommet, connector grommet, and custom grommet tooling, "cord grips", cord strain relief and strain relief connector solutions, strain relief boot & strain relief bushing products, cable bushings, connector clamp, standard clamp and custom clamp designs, plastic junction & cable junction products, molded cable grips and cable molded boot products.

These molded strain relief products are available with over 1,500,000 different configurations with no tooling cost required. Minimum order quantities are as low as 100pc for standard off the shelf parts, and 250pc minimum for custom molded products.

Strain relief and Flex Relief Solutions

Strain relief in an interconnect component can be defined as internal stress relief at the termination point or flex relief at the cable exit area. Internal to a connector or termination point, such as a breakout transition, is the point at which the wires are terminated to contacts or other wires . Many devices require the addition of strain relief in these critical areas. Molded strain reliefs, also commonly referred to as molded cable grips may be the answer. Over molding the contact and wire termination area can improve the pull-force performance, typically by a factor of two to three.

In addition to strain relief considerations, the flex life of the cable can be improved up to four times, by  incorporating an over molded flex relief.

Related Products and service categories: Custom  Molded grommets, Standard Molded grommets, Grommets for Cables, Multiwire grommets, OEM grommets, Slip on grommets, Molded on grommets,   Grommets Overmolding, Overmolded grommets, Over-molded grommets, Molded-on grommets, Cable Molded grommets, Plastic Molded grommet, Rubber Molded grommets. Injection Molded grommets, Connector Molded grommets

For Cable Grommet Manufacturing at its Best
 

Custom Computer Cables |  Custom Wire Harnesses |  Cable Molding Services |  Custom Molded Cables |  Molded Connector Types |  Strain Relief, Flex Relief |  Cord Grips, Wire Grips |  Cable Grommets |  Strain Relief Bushings |  Electronic Insert Molding |  Dongle Cables |  Injection Molding Training |  Injection Molding Tooling |  Cable Molding Tools |  Quality and Compliance |  Gallery of Molded Cables |  3D Design - Registration |  Quote Requests |

For the Best in Custom Designed Cables, Molding and Tooling
 

© Copyright 2005-2012 . All rights reserved.

network cables